3com MSR 20-20 참조 매뉴얼
2337
snmp-agent community
Syntax
snmp-agent community { read | write } community-name [ acl acl-number |
mib-view view-name ] *
mib-view view-name ] *
undo snmp-agent community community-name
View
System view
Parameter
read: Indicates that the community has read only access right to the MIB objects,
that is, the community can only inquire MIB information.
that is, the community can only inquire MIB information.
write: Indicates that the community has read and write access right to the MIB
objects, that is, the community can configure MIB information.
objects, that is, the community can configure MIB information.
community-name: Community name, a string of 1 to 32 characters.
view-name: MIB view name, a string of 1 to 32 characters. If no keyword is
specified, the default view is ViewDefault (The view created by the system after
SNMP Agent is enabled).
specified, the default view is ViewDefault (The view created by the system after
SNMP Agent is enabled).
acl acl-number: ACL for the community name, with acl-number indicating the
ACL number, in the range 2,000 to 2,999.
ACL number, in the range 2,000 to 2,999.
mib-view view-name: Specifies the MIB view name associated with
community-name, where view-name represents the MIB view name, a string of 1
to 32 characters. If no keyword is specified, the default view is ViewDefault (The
view created by the system after SNMP agent is enabled).
community-name, where view-name represents the MIB view name, a string of 1
to 32 characters. If no keyword is specified, the default view is ViewDefault (The
view created by the system after SNMP agent is enabled).
Description
Use the snmp-agent community command to configure a new SNMP
community. Parameters to be configured include access right, community name,
ACL, and accessible MIB views.
community. Parameters to be configured include access right, community name,
ACL, and accessible MIB views.
Use the undo snmp-agent community command to delete a specified
community.
community.
The community name configured with this command is only valid for the SNMP v1
and v2c agent.
and v2c agent.
Example
# Configure a community with the name of comaccess that has read-only access
right.
right.
<Sysname> system-view
[Sysname] snmp-agent community read comaccess
# Delete the community comaccess.
<Sysname> system-view
[Sysname] undo snmp-agent community comaccess