3com MSR 20-20 참조 매뉴얼

# Create an SNMP group group1 on an SNMPv3 enabled device, no 
authentication, no privacy.

<Sysname> system-view

[Sysname] snmp-agent group v3 group1 

snmp-agent local-switch fabricid switch fabricid

System view

switch fabricid: Engine ID, an even number of hexadecimal characters, in the 
range 10 to 64. Its length must not be an odd number, and the all-zero and all-F 
strings are invalid.

Use the snmp-agent local-switch fabricid command to configure a local 
switch fabric ID for an SNMP entity.

Use the undo snmp-agent local-switch fabricid command to restore the 
default.

By default, the switch fabric ID of a device is the combination of company ID and 
device ID. Device ID varies by product; it could be an IP address, a MAC address, or 
a self-defined string of hexadecimal numbers.

Notice that if the newly configured switch fabric ID is not the same as the one 
used for creating the USM user, the user is invalid.

# Configure the local switch fabric ID to be 123456789A.

<Sysname> system-view

[Sysname] snmp-agent local-switch fabricid 123456789A 

snmp-agent log { all | get-operation | set-operation }

undo snmp-agent log { all | get-operation | set-operation }

System view

all: Enables logging of SNMP GET and SET operations.

get-operation: Enables logging of SNMP GET operation.