3com MSR 20-20 참조 매뉴얼
2338
C
HAPTER
154: SNMP C
ONFIGURATION
C
OMMANDS
snmp-agent group
Syntax
The following syntax applies to SNMPv1 and SNMP v2c:
snmp-agent group { v1 | v2c } group-name [ read-view read-view ] [ write-view
write-view ] [ notify-view notify-view ] [ acl acl-number ]
write-view ] [ notify-view notify-view ] [ acl acl-number ]
undo snmp-agent group { v1 | v2c } group-name
The following syntax applies to SNMPv3:
snmp-agent group v3 group-name [ authentication | privacy ] [ read-view
read-view ] [ write-view write-view ] [ notify-view notify-view ] [ acl acl-number ]
read-view ] [ write-view write-view ] [ notify-view notify-view ] [ acl acl-number ]
undo snmp-agent group v3 group-name [ authentication | privacy ]
View
System view
Parameter
v1: SNMPv1.
v2c: SNMPv2c.
v3: SNMPv3.
group-name: Group name, a string of 1 to 32 characters.
authentication: Specifies the security model of the SNMP group to be
authentication only (without privacy).
authentication only (without privacy).
privacy: Specifies the security model of the SNMP group to be authentication and
privacy.
privacy.
read-view read-view: Read view, a string of 1 to 32 characters.
write-view write-view: Write view, a string of 1 to 32 characters.
notify-view notify-view: Notify view, for sending Trap messages, a string of 1 to
32 characters.
32 characters.
acl acl-number: Specifies an ACL by its number, in the range 2000 to 2999.
Description
Use the snmp-agent group command to configure a new SNMP group and
specify its access right.
specify its access right.
Use the undo snmp-agent group command to delete a specified SNMP group.
By default, SNMP groups configured by the snmp-agent group v3 command use
a no-authentication-no-privacy security model.
a no-authentication-no-privacy security model.
Related command: