3com MSR 20-20 참조 매뉴얼
2546
C
HAPTER
172: IPX C
ONFIGURATION
C
OMMANDS
Parameter
None
Description
Use the ipx sap gns-load-balance command to configure the router to respond
to GNS requests in the Round-robin method.
to GNS requests in the Round-robin method.
Use the undo ipx sap gns-load-balance command to configure the router to
respond with the nearest server.
respond with the nearest server.
By default, the Round-Robin mode is used, that is, the router informs the clients of
servers in turn lest a server shoulders too much pressure.
servers in turn lest a server shoulders too much pressure.
Related command:
Example
# Configure the router to respond to clients with the nearest server.
<Sysname> system-view
[Sysname] undo ipx sap gns-load-balance
ipx sap max-reserve-servers
Syntax
ipx sap max-reserve-servers length
undo ipx sap max-reserve-servers
View
System view
Parameter
length: Maximum reserve queue length of the same type service information,
ranging from 1 to 2,048.
ranging from 1 to 2,048.
Description
Use the ipx sap max-reserve-servers command to specify the maximum
reserve queue length of the same type service information.
reserve queue length of the same type service information.
Use the undo ipx sap max-reserve-servers command to restore the default.
By default, the value is 2,048.
If a newly configured value is smaller than the previous one, the excessive items in
the service information table (SIT for short) will not be deleted. If the service
information item number for the same service type exceeds the maximum value,
new service information will not be added.
the service information table (SIT for short) will not be deleted. If the service
information item number for the same service type exceeds the maximum value,
new service information will not be added.
Example
# Set the maximum reserve queue length of the same type service information to
1,024.
1,024.
<Sysname> system-view
[Sysname] ipx sap max-reserve-servers 1024
ipx sap mtu
Syntax
ipx sap mtu bytes