3com MSR 20-20 참조 매뉴얼

C

HAPTER

 172: IPX C

ONFIGURATION

 C

OMMANDS

ipx sap timer update seconds

System view

seconds: SAP updating interval, ranging from 10 to 60,000 seconds.

Use the ipx sap timer update command to specify the IPX SAP updating 
interval.

Use the undo ipx sap timer update command to restore the default.

By default, the update interval is 60 seconds.

Using this command does not take effect on an interface that adopts triggered 
update.

ipx sap multiplier, ipx update-change-only.

# Specify the SAP updating interval as 300 seconds.

<Sysname> system-view

[Sysname] ipx sap timer update 300 

ipx service service-type server-name network.node socket hop hopcount [ preference 
preference ]

undo ipx service { service-type [server-name [ network.node ] ]  [ preference 
preference ] | all }

System view

service-type: Service type, ranging from 0 to 0xFFFF. A value of 0 indicates all 
service types.

server-name: Name of the server which provides the service, a string of 1 to 47 
characters.

network.node: Network ID and node ID of a server. Network ID is an 8-bit 
hexadecimal number, ranging from 0x1 to 0xFFFFFFFD. Node ID has a length of 48 
bits, represented by a triplet of 4-digit hexadecimal numbers separated by “-”. 
Leading 0s can be omitted.

socket: It is a 4-bit hexadecimal number, ranging from 0x1 to 0xFFFF.