3com MSR 20-20 참조 매뉴얼

C

HAPTER

 174: D

IAL

 P

LAN

 C

ONFIGURATION

 C

OMMANDS

max-number: Maximum number of call connections in a 
maximum-call-connection set, in the range of 1 to 120.

all: Specifies all the maximum-call-connection sets.

Use the max-call command to configure maximum-call-connection sets.

Use the undo max-call command to remove the specified 
maximum-call-connection set or all maximum-call sets.

By default, no maximum-call-connection sets are configured.

Together with the max-call command in voice entity view, this command is used 
to limit the maximum number of call connections of a voice entity or a set of voice 
entities.

max-call (in voice entity view).

# Set the maximum number of call connections in maximum-call-connection set 1 
to 5.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] max-call 1 5 

max-call set-number

POTS/VoIP/VoFR voice entity view

set-number: Number identifying a maximum-call-connection set (number of the 
maximum-call-connection set configured in voice dial program view), in the range 
of 1 to 2147483647.

Use the max-call command to bind a voice entity to the 
maximum-call-connection set specified by the set-number argument.

Use the undo max-call command to remove the binding. Although you can bind 
each voice entity to only one maximum-call-connection set, you can change the 
binding.

By default, no maximum-call-connection set is bound, that is, there is no limitation 
on the number of call connections.

This command is used together with the max-call command in voice dial program 
view. The former is used to bind a voice entity to a maximum-call-connection set,