3com MSR 20-20 참조 매뉴얼
2641
Description
Use the select-rule type-first command to configure a rule for voice entity type
selection priority.
selection priority.
Use the undo select-rule type-first command to remove a rule for voice entity
type selection priority.
type selection priority.
By default, voice entities are not selected according to their types.
The command is used to configure the sequence of voice entity type selection
priority. If different types of voice entities are qualified for a call connection, the
system selects a suitable voice entity according to the voice entity type selection
priority rule configured by the select-rule type-first command. The order of
inputting the parameters determines voice entity type priorities. The system selects
the first type first, then the second type, and finally the third type.
priority. If different types of voice entities are qualified for a call connection, the
system selects a suitable voice entity according to the voice entity type selection
priority rule configured by the select-rule type-first command. The order of
inputting the parameters determines voice entity type priorities. The system selects
the first type first, then the second type, and finally the third type.
Related command:
Example
# Configure the system to select VoIP voice entities in the order of
VoIP->POTS->VoFR.
VoIP->POTS->VoFR.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] select-rule type-first 2 1 3
select-stop
Syntax
select-stop
undo select-stop
View
Voice entity view
Parameter
None
Description
Use the select-stop command to disable the voice entity search function.
Use the undo select-stop command to enable the voice entity search function.
By default, the voice entity search function is enabled.
Related command:
Example
# Disable the voice entity search function for voice entity 10.
3 VoFR
voice
entity
Table 693 Meanings of values
Value Meaning