3com MSR 20-20 참조 매뉴얼
2658
C
HAPTER
175: E1
AND
T1 C
ONFIGURATION
C
OMMANDS
After configuring a target match template with the match-template command
for a voice entity, you need to associate the entity with a logical interface to
indicate from which interface the traffic destined for the target should be routed.
for a voice entity, you need to associate the entity with a logical interface to
indicate from which interface the traffic destined for the target should be routed.
Related command:
Example
# Associate a POTS entity with a TS group on an E1 interface.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] line 1/0:1
mode
Syntax
mode zone-name [ default-standard ]
undo mode
View
R2 CAS view
Parameter
zone-name: Country or region name. The argument can one of the following
values:
values:
■
argentina: Uses Argentinean R2 signaling standard.
■
australia: Uses Australian R2 signaling standard.
■
bengal: Uses Bengalee R2 signaling standard.
■
brazil: Uses Brazilian R2 signaling standard.
■
china: Uses Chinese R2 signaling standard.
■
custom: Uses customized R2 signaling standard.
■
hongkong: Uses Hongkong R2 signaling standard.
■
india: Uses Indian R2 signaling standard.
■
indonesia: Uses Indonesian R2 signaling standard.
■
itu-t: Uses ITU-T R2 signaling standard.
■
korea: Uses Korean R2 signaling standard.
■
malaysia: Uses Malaysian R2 signaling standard.
■
mexico: Uses Mexican R2 signaling standard.
■
newzealand: Uses New Zealand R2 signaling standard.
■
singapore: Uses Singaporean R2 signaling standard.
■
thailand: Uses Thai R2 signaling standard.
default-standard: Initializes R2 signaling parameters such as values of the
force-metering command based on national R2 signaling variants.
force-metering command based on national R2 signaling variants.
Description
Use the mode command to configure a national R2 signaling variant.