3com MSR 20-20 참조 매뉴얼
412
C
HAPTER
23: GARP C
ONFIGURATION
C
OMMANDS
defined without the to interface-type interface-number portion comprises only
one port.
one port.
Description
Use the display garp timer command to display GARP timers.
Note that:
■
If the interface interface-list keyword-argument combination is not specified,
this command displays the GARP timer settings of all the ports.
this command displays the GARP timer settings of all the ports.
■
If the interface interface-list keyword-argument combination is specified, this
command displays the GARP timer settings of the specified ports.
command displays the GARP timer settings of the specified ports.
Related command:
Example
# Display GARP timers on port Ethernet 1/0.
<Sysname> display garp timer interface ethernet 1/0
GARP timers on port Ethernet1/0
Garp Join Time
: 20 centiseconds
Garp Leave Time
: 60 centiseconds
Garp LeaveAll Time
: 1000 centiseconds
Garp Hold Time
: 10 centiseconds
garp timer
Syntax
garp timer { hold | join | leave } timer-value
undo garp timer { hold | join | leave }
View
Ethernet interface view, port group view
Parameter
hold: Sets the hold timer.
join: Sets the join timer.
leave: Sets the leave timer.
timer-value: Timer setting (in centiseconds), which must be a multiple of 5.
Description
Use the garp timer command to set a GARP timer for an Ethernet port or all
ports in a port group in compliance with the timer setting dependencies shown in
Table 53.
ports in a port group in compliance with the timer setting dependencies shown in
Table 53.
Use the undo garp timer command to restore the default of a GARP timer. This
may fail if the default does not satisfy the dependencies shown in Table 53.
may fail if the default does not satisfy the dependencies shown in Table 53.
By default, the hold timer, the join timer, and the leave timer are set to 10
centiseconds, 20 centiseconds, and 60 centiseconds.
centiseconds, 20 centiseconds, and 60 centiseconds.