ONKYO TX-SA806 사용자 가이드

100

If you’ve connected your Zone 2 speakers to the AV 
receiver/AV amplifier, as explained in “Connecting Your 
Zone 2 Speakers Directly to the AV receiver/AV ampli-
fier” on page 99, you must set the “Powered Zone2” set-
ting to “Act” (Activated).

Notes:
• When “Act” is selected and Zone 2 turned on, the 

Zone 2 speakers connected to the ZONE 2 L/R 
speaker terminals output sound, but the surround back 
speakers connected to the SURR BACK L/R speaker 
terminals do not. When “Act” is selected and Zone 2 
turned off, the surround back speakers output sound as 
normal.

• Powered Zone2 cannot be used if “Speakers Type” is 

• This procedure can also be performed on the AV 

receiver/AV amplifier by using its [SETUP] button, 
arrow buttons, and [ENTER] button.

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

q]/[w] but-

tons to select “7. Hardware 
Setup”, and then press [ENTER].
The “Hardware Setup” menu appears.

q]/[w] but-

tons to select “2. Zone2”, and 
then press [ENTER].
The “Zone2” menu appears.

q]/[w] but-

e]/

r] buttons to select:

ZONE 2 L/R speaker terminals not 
activated (Powered Zone 2 dis-
abled).

ZONE 2 L/R speaker terminals 
activated (Powered Zone 2 
enabled).

Press the [SETUP] button.
The setup menu closes.

TX-SR806_En.book  Page 100  Monday, August 4, 2008  10:25 AM