Avaya 4621SW 사용자 가이드
Viewing and Modifying User Options
Avaya one-X Quick Edition Release 2.0.0 Telephone User Guide
July 2006
83
that the physical connection to the remote one-X Quick Edition network is working
properly, the Teleworker client telephone will contact another Teleworker server host
for a connection automatically.
properly, the Teleworker client telephone will contact another Teleworker server host
for a connection automatically.
●
A Late Approval message may be displayed after a No Response message. The late
approval message may be sent to the Teleworker client telephone by a Teleworker
server host that was unable to acknowledge a previous connection request.
approval message may be sent to the Teleworker client telephone by a Teleworker
server host that was unable to acknowledge a previous connection request.
4. Select the Exit softkey to display the previous menu, or press the Phone/Exit (
) button
to clear the display area.
Tip:
Tip:
For additional information related to troubleshooting connectivity problems, see
the "Troubleshooting" chapter of the Avaya one-X Quick Edition System
Administrator Guide.
the "Troubleshooting" chapter of the Avaya one-X Quick Edition System
Administrator Guide.
Specifying a Teleworker Server Host
It is usually not necessary to specify a Teleworker server host unless the Teleworker client
telephone is unable to establish a Teleworker session.
telephone is unable to establish a Teleworker session.
Note:
Note:
If you are configuring a Teleworker client telephone at the remote office, you must
specify a Teleworker server host as part of the configuration process. For more
information, see
specify a Teleworker server host as part of the configuration process. For more
information, see
Given a connection to the one-X Quick Edition network through a VPN, the Teleworker client
telephone at the remote office attempts to connect to one of the Quick Edition IP Telephones or
G10 PSTN gateways (a Teleworker server) on the one-X Quick Edition network.
telephone at the remote office attempts to connect to one of the Quick Edition IP Telephones or
G10 PSTN gateways (a Teleworker server) on the one-X Quick Edition network.
If the selected Teleworker server host is unavailable, the Teleworker client telephone tries
another one-X Quick Edition device one-by-one, until all possibilities are exhausted. This
process is cyclical and may be repeated indefinitely in order for the Teleworker client telephone
to establish a Teleworker session.
another one-X Quick Edition device one-by-one, until all possibilities are exhausted. This
process is cyclical and may be repeated indefinitely in order for the Teleworker client telephone
to establish a Teleworker session.
To specify the host IP address of a Teleworker server
1. At the Teleworker client telephone, access the User Options menu as described in
Tip:
Tip:
If a computer is connected to the local network, you can use the web browser on
the computer to specify the host IP address of a Teleworker server instead of
following this procedure. For more information about the web-based options, see
the computer to specify the host IP address of a Teleworker server instead of
following this procedure. For more information about the web-based options, see
.
2. Select Teleworker on the User Options menu, or press 8 on the dialpad.
3. Select Default Server on the Teleworker menu, or press 3 on the dialpad.