Epson Сетевое руководство 네트워크 가이드

다운로드
페이지 63
The Model Name and IP Address do not appear in the EpsonNet Config dialog 
box.
Cause
What to do
If the valid IP address is not set, the items
indicated in the dialog box mentioned above
may not appear.
Set a valid IP address.
Refresh the status by selecting Refresh from the View menu.
Increase the length of time before a timeout. To do this, select Options
from the Tool menu, and then select Timeout. Note that doing so can
cause EpsonNet Config to run more slowly.
Printing a Network Status Sheet (Large Format Inkjet Printers)
Before you start configuring the network interface, be sure to print a network status sheet that contains
important information such as the current configuration and the MAC address of the network
interface.
To print a network status sheet, follow the steps below.
Note:
You cannot print a status sheet using the steps below if your printer does not have an LCD panel. See the
User’s Guide on how to print the status sheet.
1. Press the Right button on the printer’s control panel once to enter the Menu mode.
2. Press the Up or Down button until TEST PRINT appears. Then press the Enter button.
3. Press the Down button until NETWORK STATUS SHEET appears on the LCD panel. Then press the
Enter
 button.
4. Finally, press the Enter button to print a network status sheet.
Note:
❏ You cannot print a status sheet in the following cases: the printer has started printing, it is offline, or it
is not ready to print.
❏ See the User’s Guide for more information on the printer’s control panel.
Epson     Network Guide
Troubleshooting     54