Epson Сетевое руководство 네트워크 가이드

9. Press the Down button to select IP, SM, or GW, then press the Right button.

10. Press the Up or Down button on the IP ADDRESS screen until the desired value appears. Then

press the Right button.

11. Press the Up or Down button on the SUBNET MASK screen until the desired value appears. Then

press the Enter button.

12. Press the Up or Down button on the DEFAULT GATEWAY screen until the desired value appears.

Then press the Enter button to set the values.

13. Press the Left button twice to exit the control panel menus.

14. Turn off your printer and then turn it back on. Be sure to wait until the initialization is complete.

Print a network status sheet to confirm the new IP address.

❏ You must first set the IP address before using EpsonNet Config with Web Browser.

❏ See the User’s Guide for more information about settings on the printer’s control panel.

These items are used to make network settings on the printer’s control panel.

NETWORK SETUP

Disable, Enable

IP ADDRESS SETTING*

Auto, Panel, PING

IP*

0.0.0.0 to 255.255.255.254

SM*

0.0.0.0 to 255.255.255.255

GW*

0.0.0.0 to 255.255.255.255

AppleTalk*

On, Off

MS Network*

On, Off

Epson     Network Guide

Tips for Administrator     56