Epson Сетевое руководство 네트워크 가이드

After connecting the printer to the network, you need to set the IP address for the network interface.

To set the IP address, subnet mask, and default gateway from the control panel, follow the steps below.

1. Turn on your printer.

2. Press the Right button on the printer’s control panel once to display MENU.

3. Press the Down button until NETWORK SETUP appears. Then press the Right button.

4. Select NETWORK SETUP, then press the Right button.

5. Select ENABLE, then press the Enter button to enable the network settings menu.

6. Press the Left button to display the NETWORK SETUP menu.

7. Press the Down button to select IP ADDRESS SETTING, then press the Right button. You can use

the following methods to get an IP address.

❏ Choose Auto when getting the IP address from a DHCP server. The IP address is automatically

obtained from the DHCP server whenever the printer is reset or turned on.

❏ Choose Panel when setting the IP address, subnet mask, and default gateway using the

printer’s control panel.

❏ To use Auto, a DHCP server must be correctly configured on the network. See the online help of

❏ Choose PING only when setting the IP address using the arp/ping command.

8. Select PANEL, then press the Enter button. Press the Left button to return to the NETWORK SETUP

menu.

Epson     Network Guide

Tips for Administrator     55