Canon imagePROGRAF iPF785 MFP M40 매뉴얼

HP-GL/2 problems

With HP-GL/2, printing is misaligned .................................................................................................................... 649

Lines or images are missing in printed HP-GL/2 jobs. ........................................................................................... 649

Lines are printed too thick or thin in HP-GL/2 print jobs ........................................................................................ 649

HP-GL/2 jobs are printed in monochrome (or color) .............................................................................................. 650

Printed colors of lines are inaccurate during HP-GL/2 printing .............................................................................. 650

HP-GL/2 jobs are printed 6 mm larger than specified ........................................................................................... 650

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified .................................................... 650

HP-GL/2 printing takes a long time ....................................................................................................................... 650

The printer stops when printing a HP-GL/2 job (the carriage stops moving) .......................................................... 650

With HP-GL/2, printing is misaligned

Cause

Corrective Action

The plotter origin is incorrect.

Check the printing commands.

Set Detect img size to Command priority or Detected size in the Control Panel
menu.

The Margin setting in the Control Panel menu
is incorrect.

Adjust the Margin setting values in the Control Panel menu.

Lines or images are missing in printed HP-GL/2 jobs.

Cause

Corrective Action

The memory is full.

Check the size of the data in the print job.

An HP-GL/2 command not supported by this printer was
received.

Check the print job and settings.

The printer has received print data that includes HP RTL
commands when Auto Rotate is On in the Control Panel
menu.

In the Control Panel, set Auto Rotate to Off and print again.

The plotter origin is incorrect.

Set Detect img size to Command priority or Detected size in the Control
Panel menu.

Oversize in the Control Panel menu is set to Off.

Set Oversize to On in the Control Panel menu.

Lines are printed too thick or thin in HP-GL/2 print jobs

Cause

Corrective Action

The Width setting in the Control Panel menu
is incorrect.

Change the Width setting configured in Pen no. of the Palette A or Palette B selected
in the Control Panel menu.

ThickenFineLines in the Control Panel menu
is set to Off.

If fine lines are printed faintly, setting ThickenFineLines to On will print the lines more
distinctly.

The Ln wdth correct setting in the Control
Panel menu is incorrect.

Change the Ln wdth correct setting in the Control Panel menu.

iPF785

With HP-GL/2, printing is misaligned

User's Guide

Troubleshooting

HP-GL/2 problems

649