Canon imagePROGRAF iPF785 MFP M40 매뉴얼
Other problems
Other problems
The Ink Tank Cover has become detached from the printer
The Ink Tank Cover has become detached from the printer
Cause
Corrective Action
The Ink Tank Cover became detached from the printer because too much
force was applied to the Ink Tank Cover.
force was applied to the Ink Tank Cover.
Attach the Ink Tank Cover to the printer.
The printer does not go on
The printer does not go on
Cause
Corrective Action
The printer is unplugged.
Plug the power cord into the outlet, and then turn on the printer.
The specified voltage is not supplied. Check the voltage of the outlet and breaker.
The printer takes time to start up
The printer takes time to start up
Cause
Corrective Action
The printer may have shut down incorrectly last time. This may happen
after power outages or if the printer is unplugged before it is turned off.
In this case, the next time power is restored, the printer's hard disk is
checked, and startup may take some time.
after power outages or if the printer is unplugged before it is turned off.
In this case, the next time power is restored, the printer's hard disk is
checked, and startup may take some time.
Please wait a while, because it may take several minutes to
finish checking the hard disk.
If an error message is displayed after the hard disk check, fol-
low the instructions indicated to resolve the problem.
finish checking the hard disk.
If an error message is displayed after the hard disk check, fol-
low the instructions indicated to resolve the problem.
iPF785
The Ink Tank Cover has become detached from the printer
Troubleshooting
Other problems
651