Olympus DM-520 매뉴얼 소개

다운로드
페이지 128
14
1
Power supply
2
 Insert battery, observing the
correct = and - polarities.
Inserting batteries
This recorder can be used with either Ni-MH 
Rechargeable Batteries or AAA Alkaline 
Batteries.
1
 Slide the battery cover open
while lightly pressing the battery
cover release button.
•  When charging the recorder, be sure 
to use the supplied specified Ni-MH 
rechargeable (BR401) batteries.
•  The supplied rechargeable batteries 
are not fully charged. Before using 
the unit the first time or after long 
periods of disuse, it is recommended 
that you charge them until full (☞ 
P.15, P.16).
4
 Slide the POWER/HOLD switch in
the direction indicated by the
arrow, and turn the power on.
3
 Close the battery cover
completely by pressing to the
direction A, then sliding to the
direction B.
•  If the “hour” indicator flashes in the 
display, see “Setting time and date
[Time & Date]” (☞ P.20).
Battery indicator
The battery indicator on the display changes 
as the batteries lose power.
•  When [:] appears on the display, replace 
the batteries as soon as possible. When 
the batteries are too weak, [
] and 
[Battery Low] appears on the display, the 
recorder shuts down.
Po
w
er s
up
ply