Olympus DM-520 매뉴얼 소개

It can be charged by connecting to the USB 

connecting AC adapter (A514) (optional).

Before connecting the AC adapter, switch 

the USB Connection setting to [AC Adapter] 

(☞ P.69).

recorder while pressing the STOP 
4

•  [Batt. Charge mode] will be 

displayed on the screen.

•  Charging will start when [

Charging] 

appears in the display.

•  Charging will stop temporarily during 

recording, playback or data transmission.

•  The recorder cannot be charged when the 

PC is not turned on. Also, it may not be 

charged when the PC is not switched on, 

or when it is in the standby, hibernate or 

sleep mode.

•  Do not charge the recorder with the USB 

hub connected.

•  If [Cannot charge] is displayed, it means 

that a battery that cannot be charged is 

in the recorder. Replace the batteries with 

supplied ones at once (☞ P. 14).

•  Charging is completed when battery 

indication becomes to [<] (charging time: 

approximately 4 hours *).

  *  It shows the approximate time when 

charging the rechargeable battery fully 

from no remaining power at the room 

temperature. The charging time will be 

changed depending on the remaining 

amount and the state of batteries.

•  You cannot charge when [;]*1 or 

[=]*2 blinks. Charge the batteries at the 

temperature from 5°C to 35°C (41°F to 95°F).

*1 [;]:  When surrounding temperature is 

low.

*2 [=]:  When surrounding temperature is 

high.

•  When using time becomes notably short 

even after the batteries are fully charged, 

replace them with new ones.

•  Be sure to push the USB connector all the 

way in. Otherwise, the recorder may not 

operate properly.

•  Be sure to use the attached dedicated 

cable for the USB connection cable. If any 

other company’s cable is used, it cause 

problems. Also, please do not connect this 

dedicated cable to any other company’s 

product.