Olympus DM-520 매뉴얼 소개

•  Manganese batteries may not be used in 

this recorder.

•  When changing batteries, AAA alkaline 

batteries or Olympus Ni-MH rechargeable 

batteries are recommended.

•  Be sure to stop the recorder before 

replacing the batteries. Unloading the 

batteries while the recorder is in use may 

corrupt the file. If you are recording into 

a file and the batteries run out, you will 

lose your currently recorded file because 

the file header will not be able to close. 

It is crucial to change the batteries once 

you see only one Hash mark in the battery 

indicator.

•  If it takes longer than 15 minute to replace 

the dead batteries or if you take the 

batteries in and out repeatedly at short 

intervals, you may have to reset the time 

when you have loaded fresh batteries 

(☞ P.20).

•  Remove the batteries if you are not going 

to use the recorder for an extended period 

of time.

•  When playing a voice/music file, the 

recorder may be reset due to the 

reduction of the voltage output of the 

batteries depending on the volume level 

even if [8] is displayed in the battery 

indicator. In this case, lower the volume of 

the recorder.

•  When replacing rechargeable batteries, be 

sure to use Ni-MH rechargeable batteries. 

The use of other manufacturers' products 

can damage the recorder and should be 

avoided.

You can charge the batteries by connecting 

to a PC's USB port.  When charging, be sure 

to correctly place the rechargeable batteries 

(supplied) into the recorder (☞ P.14).

Do not charge primary batteries such as 

alkali or lithium batteries. It may cause 

battery leakage heating and recorder 

malfunction.

pressing the STOP 4 button.

•  [Batt.Charge mode] appears in the 

display while pressing the STOP 4 

button.

•  Press and hold the STOP 4 button 

until [Charging] appears in the 

display.