Netgear WC7500 - ProSAFE® Wireless Controller 사용자 설명서

If the access point is rebooted, it loses its configuration.

After the connection with the wireless controller is reestablished, the remote access point 

functions once again as a managed access point.

The Discovery Wizard provides two methods to find access points that are not yet on the 
managed access point list. These methods are described in the following sections:

If security is not set up, or is set up incorrectly, when the wireless controller 
pushes the configurations to the access points, you could accidentally 
wipe out all security, leaving your entire network open to access. Be sure 
that you set up security correctly (see 

Access points in the factory default state are access points “out of the box” that were never 

employed. Access points in a Layer 2 subnet are access points that are installed and 
functioning in the same IP subnet as the wireless controller and that are connected to the 
wireless controller through a back-end Layer 2 switch.



Open a web browser, and in the browser’s address field, type the wireless controller’s IP 
address.

By default, the IP address is 192.168.0.250.

The wireless controller’s login window opens.

Enter your user name and password.

Click the Login button.