Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼
Monitor System Access and Performance
567
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Manage Logging, Alerts, and Event Notifications
The following sections provide information about managing logging, alerts, and event
notifications:
notifications:
•
•
•
•
•
•
•
•
Note:
This release does not support sending the NTP and DNS logs to the
syslog server or the mail server.
syslog server or the mail server.
Logging, Alert, and Event Notification
You can configure the VPN firewall to log routing events such as dropped and accepted
packets; to log system events such as a change of time by an NTP server, secure login
attempts, and reboots; and to log other events. You can also schedule logs to be sent to the
administrator and enable logs to be sent to a syslog server on the network.
packets; to log system events such as a change of time by an NTP server, secure login
attempts, and reboots; and to log other events. You can also schedule logs to be sent to the
administrator and enable logs to be sent to a syslog server on the network.
Note:
Enabling routing and other event logs might generate a significant
volume of log messages. NETGEAR recommends that you enable
firewall logs for debugging purposes only.
volume of log messages. NETGEAR recommends that you enable
firewall logs for debugging purposes only.
Configure and Activate Logs
To configure and activate logs:
1.
On your computer, launch an Internet browser.
2.
In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3.
In the Username field, type your user name and in the Password / Passcode field, type
your password.
your password.