Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

You can perform a remote reboot, for example, when the VPN firewall seems to have 
become unstable or is not operating normally. For information about scheduling the VPN 
firewall to reboot, see 

Rebooting breaks any existing connections either to the VPN firewall (such as your 
management session) or through the VPN firewall (for example, LAN users accessing the 
Internet). However, connections to the Internet are automatically reestablished when 
possible.



On your computer, launch an Internet browser.

In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

In the Username field, type your user name and in the Password / Passcode field, type 
your password.

For the default administrative account, the default user name is admin and the default 
password is password.

If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.

If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.

Click the Login button.

The Router Status screen displays.

Select Monitoring > Diagnostics.

The Diagnostics screen displays the IPv4 settings.

In Router Options section, click the Reboot button. 

The VPN firewall reboots. The Diagnostics screen might remain visible during the reboot 
process or a status message with a counter might show the number of seconds left until 
the reboot process is complete. The reboot process takes about 160 seconds.

You can schedule the VPN firewall to reboot at a time when a service disruption is minimal.

For information about rebooting the VPN firewall immediately, see