Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼
Net Mode Configuration Commands
50
ProSAFE Dual WAN Gigabit Firewall with SSL & IPsec VPN
IPv6 WAN Commands
This section describes the following commands:
•
•
•
net ipv6 ipmode configure
This command configures the IPv6 mode. After you issue the net ipv6 ipmode
configure
configure
command, you enter the net-config [mode] mode and then you can configure the
IP mode. You can select support for IPv4 only or for both IPv4 and IPv6.
WARNING:
Changing the IP mode causes the VPN firewall to reboot.
Step 1
Format
Mode
net
Step 2
Format
Mode
net-config [mode]
Keyword
Associated Keyword to
Select
Description
Specifies the IPv6 routing mode.
Command example:
FVS336Gv2> net ipv6 ipmode configure
net-config[mode]> ip_type IPv4/IPv6
net-config[mode]> save
net-config[mode]> ip_type IPv4/IPv6
net-config[mode]> save
Related show command:
net wan wan ipv6 configure <wan interface>
This command configures the IPv6 settings for a WAN interface. After you issue the net wan
wan ipv6 configure
wan ipv6 configure
command to specify one of the two WAN interfaces (that is, WAN1
or WAN2), you enter the net-config [wan-ipv6] mode. First, specify the ISP connection type
(you can select only a single type). Then, for the selected ISP connection type, configure one
keyword and associated parameter or associated keyword at a time in the order that you
prefer.
(you can select only a single type). Then, for the selected ISP connection type, configure one
keyword and associated parameter or associated keyword at a time in the order that you
prefer.
net ipv6 ipmode configure
ip_type {IPv4_Only | IPv4/IPv6}
ip_type
IPv4_Only or IPv4/IPv6