Netgear WNR2200 - N300 Wireless Router 설치 가이드

Troubleshooting

31

4. Wireless router Internet light off. If the Internet light is off, verify that the Ethernet cable is 

securely connected between the cable or ADSL modem, and that both the modem and N300 
wireless router are turned on. 

If your N300 wireless router is unable to access the Internet, and your Internet light is amber, 
check the N300 wireless router to see if it is able to get an Internet IP address from your service 
provider. Unless you have a static IP address, your N300 wireless router automatically requests an 
IP address from your service provider. 

Log in to the N300 wireless router.

Select Router Status under Maintenance on the main menu to check that an IP address is 
shown for the Internet port. If 0.0.0.0 is shown, your N300 wireless router has not obtained an 
IP address from your service provider.

If your router is unable to obtain an IP address from the your service provider, the problem might 
be one of the following:

•

Your service provider might require a login. Ask your service provider whether they require 
PPP over Ethernet (PPPoE) login.

•

The service name, user name, and password might be set incorrectly. See 

.

•

Your service provider might check for your computer’s host name.
Assign the computer host name of your ISP account to the N300 wireless router in the Basic 
Settings screen.

•

Your service provider allows only one Ethernet MAC address to connect to Internet, and 
might check for your computer’s MAC address. In this case, do one of the following:

–

Inform your service provider that you have bought a new network device, and ask them to 
use the N300 wireless router’s MAC address.

–

Configure your router to spoof your computer’s MAC address. This can be done in the 
Basic Settings screen. Refer to the online help, which you can access from the N300 
wireless router main menu.