Netgear WNR2200 - N300 Wireless Router 설치 가이드
Getting to Know Your Wireless Router
3
Front Panel
The front panel has seven status lights that you can use to monitor and verify various conditions.
There are also two switch buttons on the right (or at the top if the router is in its stand). The status
lights are described in
There are also two switch buttons on the right (or at the top if the router is in its stand). The status
lights are described in
.
Figure 2
Table 1.
Status Light Descriptions
Item
Function
Activity
Description
1.
Power/Test Solid Amber
The unit is starting up after being powered on.
Solid Green
The unit startup has completed; the unit is ready.
Off
Power is not supplied to the router.
2.
Internet
Off
No Ethernet cable is connected to the modem.
Solid Amber
The Ethernet cable connection to the modem has been detected.
Solid Green
An IP address has been received; ready to transmit data.
3.
LAN
(Ports 1–4)
(Ports 1–4)
Solid Green
The LAN port has detected a 100 Mbps link with an attached device.
Solid Amber
The LAN port has detected a 10 Mbps link with an attached device.
Off
No link is detected on this port.
4.
USB
Off
No USB device is connected, or the “Safely Remove Hardware”
button has been pressed and it is now safe to remove the attached
USB device.
button has been pressed and it is now safe to remove the attached
USB device.
Solid Green
The USB device has been accepted by the Router and is ready to be
used.
used.
1
2
3
4
5
6