Netgear WNR2020v2 - 5PT N300 Wireless Router 사용자 설명서

Make sure that the Ethernet cable is securely connected to the router Internet port and 
the modem.

Make sure that power is turned on to the connected modem.

Be sure that you are using the correct cable.

When you connect the router’s Internet port to a cable or DSL broadband modem, use 
the cable that was supplied with the cable or DSL broadband modem. This cable can be 
a standard straight-through Ethernet cable or an Ethernet crossover cable.

If the WiFi LED 

 stays off, check to see if someone disabled the wireless radio or set up a 

38. The WiFi LED is lit when the wireless radio is turned on.

If you cannot log in to the router from a computer or wireless device on your local network, 
check the following:

Make sure that your computer or wireless device is connected to the router’s network.

For a WiFi connection, select the network and entered its WiFi password.

For a wired connection, use an Ethernet cable to connect your computer to an 
Ethernet LAN port on the router (not the Ethernet Internet port).

Launch a web browser and enter www.routerlogin.net.

If a login prompt does not display, try the following:
a. Close the browser and launch it again.
b.  Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are 

using Internet Explorer, click the Refresh button to be sure that the Java applet is 

loaded.

c.  If you are using a wired connection, check the Ethernet connection between the 

computer and the router. One of the router Ethernet LEDs 

 lights to 

show that your computer is connected.

If the login prompt displays, but you cannot log in, try the following:
a. Make sure that you are using the correct login information.

The user name is admin and the default password is password. Make sure that 
Caps Lock is off when you enter this information.

b.  If you customized the IP address scheme that the router uses, see 

74.