Netgear WNR2200 - N300 Wireless Router 사용자 설명서
N300 Wireless Router with USB WNR2200 User Manual
Customizing Your Network Settings
5-22
v1.0, September 2010
Wireless Repeating (Also Called WDS)
The WNR2200 router can be used with a wireless access point (AP) to build large bridged wireless
networks. Wireless repeating is a type of Wireless Distribution System (WDS).
networks. Wireless repeating is a type of Wireless Distribution System (WDS).
The following figure shows a wireless repeating scenario:
To set up a wireless network using WDS,
t
he following conditions must be met for both APs:
•
or
).
•
Both APs must be on the same LAN IP subnet. That is, all the AP LAN IP addresses are in the
same network.
same network.
•
All LAN devices (wired and wireless computers) must be configured to operate in the same
LAN network address range as the APs.
LAN network address range as the APs.
Warning: If you use the wireless repeating function, your options for wireless security
are limited to None or WEP. For more information about wireless security, see
Figure 5-10
Repeater AP
Base Station AP