Netgear WNR2200 - N300 Wireless Router 사용자 설명서
N300 Wireless Router with USB WNR2200 User Manual
Customizing Your Network Settings
5-24
v1.0, September 2010
Setting Up the Base Station
The wireless repeating function works only in hub and spoke mode. The units cannot be daisy
chained. You must know the wireless settings for both units. You must know the MAC address of
the remote unit. First, set up the base station, and then set up the repeater. To set up the base
station:
chained. You must know the wireless settings for both units. You must know the MAC address of
the remote unit. First, set up the base station, and then set up the repeater. To set up the base
station:
1. Set up both units with exactly the same wireless settings (SSID, mode, channel, and security).
Note that the wireless security option must be set to None or WEP.
2. Log into the wireless router base unit, under the Advanced heading, select Wireless
Repeating Function to display the Wireless Repeating Function screen.
3. In the Wireless Repeating Function screen (depending on the frequency you want to use),
select the Enable Wireless Repeating Function check box and the Wireless Base Station
radio button.
radio button.
4. Enter the MAC address for one or more repeater units.
5. Click Apply to save your changes.
Figure 5-12