KitchenAid 36'' Under-the-Cabinet 600 CFM Architect® Series II 설치 가이드
12
Make Electrical Connection
1. Disconnect power.
2. Use UL listed wire connectors and connect the black wires
(B) together.
3. Use UL listed wire connectors and connect the white wires
(A) together.
4. Connect green (or bare) ground wire from home power supply
to the yellow-green ground wire (D) in the terminal box using
UL listed wire connector.
UL listed wire connector.
5. Install terminal box cover.
6. Reinstall the rear support.
7. Reinstall the 2 lateral supports.
8. Check that all light bulbs are secure in their sockets.
9. Reconnect power.
For Vented Installations Only:
■
Connect ventwork to hood. Seal joints with clamps to
make secure and airtight.
make secure and airtight.
Complete Installation
1. Replace grease filters. See the “Range Hood Care” section.
2. Check the operation of the range hood fan and light. See
“Range Hood Use” section.
If range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect power and check wiring connections.
circuit breaker has tripped or a household fuse has blown.
Disconnect power and check wiring connections.
NOTE: To get the most efficient use from your new range hood,
read the “Range Hood Use” section.
read the “Range Hood Use” section.
A. White wires
B. Black wires
B. Black wires
C. UL listed wire connectors
D. Green (or bare) and yellow-green ground wire
D. Green (or bare) and yellow-green ground wire
E. Home power supply cable
F. UL listed or CSA approved ½" strain relief
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
A
B
C
D
E
F
WARNING
Electrical Shock Hazard
Electrically ground blower.
Connect ground wire to green and yellow ground wire
in terminal box.
in terminal box.
Failure to do so can result in death or electrical shock.