Kärcher DS 6.000 Mediclean 사용자 설명서
– 10
Subject to technical modifications!
You can rectify minor faults yourself with
the help of the following overview.
If in doubt, please consult the authorized
customer service.
Danger
the help of the following overview.
If in doubt, please consult the authorized
customer service.
Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the
authorised customer service.
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the
authorised customer service.
Power supply is interrupted
Remove the mains plug, check the con-
necting cable and the mains plug for
damage.
necting cable and the mains plug for
damage.
Reinsert the baffle plate correctly.
(see: FILLING THE WATER FILTER
RESERVOIR)
(see: FILLING THE WATER FILTER
RESERVOIR)
Check the intermediate filter.
Wash the filter, install new intermediate
filter if required.
(see: CARE, MAINTENANCE)
filter if required.
(see: CARE, MAINTENANCE)
Let the intermediate filter dry or install
new dry filter.
(see: CARE, MAINTENANCE)
new dry filter.
(see: CARE, MAINTENANCE)
Replace the water and add 1 to 2 cap-
fuls of FoamStop. Check the intermedi-
ate filter for moisture. If necessary,
clean the damp filter under running wa-
ter and allow it to dry afterwards or in-
stall new filter.
fuls of FoamStop. Check the intermedi-
ate filter for moisture. If necessary,
clean the damp filter under running wa-
ter and allow it to dry afterwards or in-
stall new filter.
Check the MIN / MAX marks on the res-
ervoir.
ervoir.
Replace the HEPA filter.
(see: CARE, MAINTENANCE)
(see: CARE, MAINTENANCE)
Remove the blockage.
(see: CARE, MAINTENANCE)
(see: CARE, MAINTENANCE)
Close the false air slide.
(see: WORKING WITH THE FLOOR
NOZZLE)
(see: WORKING WITH THE FLOOR
NOZZLE)
Properly install the cover of the water fil-
ter container.
ter container.
Remove the water filter and correctly in-
sert it into the appliance.
(see: FILLING THE WATER FILTER
RESERVOIR)
sert it into the appliance.
(see: FILLING THE WATER FILTER
RESERVOIR)
DS 6.000 Waterfilter
DS 6.000 Waterfilter, Mediclean:
HEPA filter H 13 class according to EN
1822 (effective 1998)
DS 5.800 Waterfilter:
HEPA filter H 12 class according to EN
1822 (effective 1998)
DS 6.000 Waterfilter, Mediclean:
HEPA filter H 13 class according to EN
1822 (effective 1998)
DS 5.800 Waterfilter:
HEPA filter H 12 class according to EN
1822 (effective 1998)
Troubleshooting
Appliance does not vacuum
Weak/diminishing suction power
Forgot the baffle plate or not inserted
correctly
correctly
Intermediate filter missing or not
inserted correctly
inserted correctly
Intermediate filter is dirty
Intermediate filter is wet
Strong foam generation in the water
filter reservoir
filter reservoir
Too little or too much water in the water
filter reservoir
filter reservoir
HEPA filter is soiled
Accessory is blocked
False air slide at the handle is open
Appliance flap does not close
The cover of the water filter is not
properly installed
properly installed
The water filter is not properly installed
17
EN