Kärcher DS 6.000 Mediclean 사용자 설명서

다운로드
페이지 198
– 9
Illustration 
Clean/rinse the intermediate filter as 
necessary.
(see: CARE, MAINTENANCE)
Caution
All parts of the water filter must be properly 
dried prior to assembly! 
Caution
Prior to storing the appliance, ensure that 
no water remains in the water filter contain-
er and all parts of the water filter system are 
properly dried.
Hold the appliance at the carrying han-
dle when you want to transport it and 
store it in dry rooms. 
Illustration 
The appliance can be stored in an up-
right position. On the bottom of the ap-
pliance there is an additional parking 
position for the floor nozzle.
몇 Danger
Turn off the appliance and remove the 
mains plug prior to any care and mainte-
nance work.
Note: Clean the intermediate filter at least 
every 8 weeks with normal use. If the suc-
tion performance is deteriorating, the filter 
must be cleaned sooner.
Use a commerically available soft house-
hold sponge to clean the filter to avoid dam-
aging the coated fins.
Illustration 
The individual fins of the intermediate 
filter can be cleaned under running wa-
ter using the sponge.
Allow the filter to dry completely.
With normal use, replace the intermedi-
ate filter at least every 12 months, if 
necessary, it can be replaced sooner.
Note: The intermediate filter must be 
disposed off as residual waste.
몇 Danger
Do not use abrasives, glass or universal 
cleaners! Never immerse the appliance in 
water.
Illustration 
Suction hose and handle can be disas-
sembled for cleaning.
Check the accessories for obstructions 
and clean if necessary. Do not use wa-
ter to clean the floor nozzle.
* depending on model
Cut hair that is entangled in the roller brush 
along the cutting edge with a pair of scis-
sors, and vacuum them off using the crev-
ice nozzle.
Note: In order to ensure an optimised 
cleaning performance and function of the 
appliance, this filter must be changed at 
least every 12 months. Replace sooner if 
damaged or extremely dirty.
Caution
Do not rinse out the HEPA filter!
Remove the outgoing air flap.
Illustration 
Remove the HEPA filter.
Insert a new HEPA filter so that it 
"CLICKS" into place.
Reinstall the lid so it "CLICKS" into 
place.
Transport, storage
Maintenance and Care
Cleaning/replacing the intermediate 
filter
Cleaning the appliance and 
accessories
Clean the turbo floor nozzle
Change HEPA filter
Technical specifications
Nominal voltage
1~50/60 Hz
220-240 V
Output P
nom
900
W
Fill capacity of the water 
filter reservoir
1,7
l
Sound
66
dB(A)
Weight (without accesso-
ries)
7,5
kg
Nominal width, accesso-
ries
35
mm
16
EN