Kärcher DS 6.000 Mediclean 사용자 설명서

다운로드
페이지 198
– 8
Illustration 
Pull the power cable out of the appli-
ance completely.
Illustration 
Insert the appliance plug into the mains 
socket.  
To switch on the appliance press the 
on/off switch.
Caution
Do not vacuum up large amounts of pow-
dery materials such as cocoa, flour, laundry 
detergent, pudding powder or similar mate-
rials!
Illustration 
Use your foot to press the reversing 
switch of the floor nozzle. The brush 
strips at the bottom of the floor nozzle 
are extended.
Illustration 
Use your foot to press the reversing 
switch of the floor nozzle. The brush 
strips at the bottom of the floor nozzle 
are retracted.
Note
Due to the high suction power of the appli-
ance, the suction nozzles can draw them-
selves too firmly to carpets, upholstery, etc. 
during work. In this case, use the false air 
slide to reduce the suction power. Close it 
again after use.
Note: The crevice and upholstery nozzles 
are stored in the appliance.
Illustration 
Open the accessories flap and take out 
the desired nozzle for working.
for edges, joints, heaters and hard to reach 
locations.
for cleaning upholstered furniture, laced 
curtains, mattresses, etc.
* depending on model
Illustration 
Turbo floor nozzle 
(order no. 4.130-177.0)
brush and vacuum in one work cycle. 
Especially suitable in order to pick up 
animal hair and to vacuum high floor 
carpets. The drive of the brush roller 
happens by the air stream.
There is not electrical outlet necessary.
Illustration 
Switch off the appliance; press the on/
off foot switch to do so.
Illustration 
Insert the floor nozzle into the pickup on 
the appliance when taking a break.
Illustration 
Turn off the appliance and disconnect 
the mains plug.
Illustration 
The cable is automatically retracted into 
the appliance by slightly pulling on the 
power cord.
Caution
Rinse the water filter container, the filter 
cover and the baffle plate under running 
water after each use and allow them to dry. 
Make sure that the guides of the baffle plate 
are also clean.
Illustration 
Remove the water filter reservoir from 
the appliance (see: FILLING THE WA-
TER FILTER RESERVOIR).
Illustration 
Remove the lid from the reservoir and 
take out the baffle plate.
Empty the water filter container.
Rinse the cover, the baffle plate and the 
water filter container under running wa-
ter and allow them to dry.
Start working
Working with the floor nozzle
Vacuuming hard surfaces
Vacuuming carpeted floors
Working with the crevice nozzle and 
the upholstery nozzle
Crevice nozzle
Upholstery nozzle
Turbo floor nozzle
Park position
Finish operation
Cleaning the water filter system
15
EN