Cisco Cisco ONS 15310-MA SONET Multiservice Platform 설치 가이드
5
Upgrading the Cisco ONS 15310-MA to Release 7.2
78-17822-01
DLP- U263 Verify CTC Workstation Requirements
NTP-U173 Back Up the Software Database
Step 1
Log into CTC. For detailed instructions, refer to the Cisco ONS 15310-CL and Cisco ONS 15310-MA
Procedure Guide. If you are already logged in, continue with
Procedure Guide. If you are already logged in, continue with
Step 2
In the node (default) view, click the Maintenance > Database tabs.
Step 3
Click Backup.
Step 4
Save the database on the workstation's hard drive or on network storage. Use an appropriate file name
with the file extension .db. (Cisco recommends that you use the IP address of the node and the date, for
example 1010120192061103.db.)
with the file extension .db. (Cisco recommends that you use the IP address of the node and the date, for
example 1010120192061103.db.)
Step 5
Click Save. A message appears indicating that the backup is complete.
Step 6
Click OK.
Step 7
Repeat Steps
through
for each node in the network.
Step 8
(Optional) Cisco recommends that you manually log critical information by either writing it down or
printing screens where applicable. Use the following table to determine the information you should log;
complete the table (or your own version) for every node in the network.
printing screens where applicable. Use the following table to determine the information you should log;
complete the table (or your own version) for every node in the network.
Purpose
This procedure preserves all configuration data for your network before
performing the upgrade.
performing the upgrade.
Tools/Equipment
PC or UNIX workstation
Prerequisite Procedures
Required/As Needed
Required
Onsite/Remote
Onsite or remote (but in the presence of the workstation)
Security Level
Maintenance or higher; or Superuser, if performing optional
Table 1
Manually Recorded Data
Item
Record Data Here (If Applicable)
IP address of the node.
Node name.
Timing settings.
DCC connections; list all optical ports that have DCCs activated.
User IDs; list all, including at least one superuser.
Inventory; do a print screen from the inventory window.
Network information; do a print screen from the Provisioning tab in
the network view.
the network view.
Current configuration (linear, etc.); do print screens as needed.
List all protection groups in the system; do a print screen from the
protection group window.
protection group window.
List alarms; do a print screen from the alarm window.
List circuits; do a print screen from the circuit window.