Cisco Cisco ASA 5512-X Adaptive Security Appliance - No Payload Encryption 설치 가이드

This section describes how to install the ASDM and operating system (OS) images.

This procedure uses TFTP. For FTP or HTTP, see the copy command.

(If there is a configuration migration) Show the configuration on the terminal so that you can back up 
your configuration:

Copy the output from this command, then paste the configuration in to a text file. For other methods of 
backing up, see the configuration guide.

Copy the ASA software to the active unit flash memory:

 tftp://server[/path]/asa_image_name {disk0:/ | disk1:/}[path/]asa_image_name 

Example:

hostname# copy tftp://10.1.1.1/asa847-smp-k8.bin disk0:/asa847-smp-k8.bin

For other methods than TFTP, see the copy command.

Copy the ASDM image to the active unit flash memory:

 tftp://server[/path]/asdm_image_name {disk0:/ | disk1:/}[path/]asdm_image_name

Example:

hostname# copy tftp://10.1.1.1/asdm-641.bin disk0:/asdm-641.bin

If you are not already in global configuration mode, access global configuration mode:

Show the current boot images configured (up to 4):

Example:

hostname(config)# show running-config boot system

boot system disk0:/cdisk.bin

boot system disk0:/asa914-smp-k8.bin

The ASA uses the images in the order listed; if the first image is unavailable, the next image is used, and 
so on. You cannot insert a new image URL at the top of the list; to specify the new image to be first, you 
must remove any existing entries, and enter the image URLs in the order desired, according to 

and