Cisco Cisco Agent Desktop 8.5 설치 가이드
Cisco CAD Installation Guide
50
February 21, 2013
6. Click Next to display the Ready to Install the Program window (
7. Click Install to start the installation.
NOTE: If Cisco Security Agent (CSA) is running on the server
computer, the installation process stops it temporarily during the
installation and restarts it after the installation finishes.
computer, the installation process stops it temporarily during the
installation and restarts it after the installation finishes.
NOTE: If you are setting up replication for Directory Services and/or
the Recording and Statistics service, make sure that Cisco Security
Agent is stopped on both computers.
the Recording and Statistics service, make sure that Cisco Security
Agent is stopped on both computers.
NOTE: The Sync service must connect to the ICM Logger SQL
database via a TCP/IP connection. To configure this, run the SQL
Server Network Utility on the ICM Logger machine and, on the
General tab, ensure that TCP/IP is enabled.
database via a TCP/IP connection. To configure this, run the SQL
Server Network Utility on the ICM Logger machine and, on the
General tab, ensure that TCP/IP is enabled.
8. Just before the final InstallShield Wizard window is displayed, a command
window opens, displaying the message, “This window is part of the <installer
name> installation process. Do not close this window, it will self terminate
when finished.” Ignore the command window and click Finish to complete the
installation process.
name> installation process. Do not close this window, it will self terminate
when finished.” Ignore the command window and click Finish to complete the
installation process.
Figure 4.
Ready to Install the Program window