Cisco Cisco TelePresence Video Communication Server Expressway
Enabling endpoints registered on the video network to call MOC clients registered on OCS
If Hardware Load Balancers are used, set up neighbor zones on the “OCS
gateway” Cisco VCS(s) to receive calls from OCS
gateway” Cisco VCS(s) to receive calls from OCS
If Hardware Load Balancers are used then OCS will still send messages to Cisco VCS from the
devices directly behind the main Hardware Load Balancer.
devices directly behind the main Hardware Load Balancer.
If the main Hardware Load Balancer is in front of OCS Directors, then neighbor zones need to be
configured that reference the OCS Directors, so that Cisco VCS will treat calls received from these
devices as OCS calls.
configured that reference the OCS Directors, so that Cisco VCS will treat calls received from these
devices as OCS calls.
If the main Hardware Load Balancer is in front of FEPs, then neighbor zones need to be configured
that reference all the FEPs, so that calls received from these devices are treated as OCS calls.
that reference all the FEPs, so that calls received from these devices are treated as OCS calls.
1. Go to the Zones page (VCS configuration > Zones).
2. Select
New.
3. Configure the fields as follows:
Name
“OCS receive only 1”
Type
Neighbor
4. Click
Create Zone.
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2
Page 49 of 92