Cisco Cisco TelePresence Video Communication Server Expressway
Enabling MOC clients registered on OCS to call endpoints registered on the video network
Enabling MOC clients registered on OCS to call
endpoints registered on the video network
endpoints registered on the video network
”OCS gateway” Cisco VCS Control configuration
1. Configure the “OCS gateway” Cisco VCS with a neighbor zone that contains the video network.
2. Set up one or more Search rules to route calls with video network domains to the video network.
Note: In small test and demo networks this configuration is not necessary as the video network Cisco
VCS is the “OCS Gateway” Cisco VCS. You can skip this section and go to “OCS configuration” on
page 53.
VCS is the “OCS Gateway” Cisco VCS. You can skip this section and go to “OCS configuration” on
page 53.
Configure the “OCS gateway” Cisco VCS with a neighbor zone that
contains the video network
contains the video network
1. Go to the Zones page (VCS configuration > Zones).
2. Click
New.
3. Configure the fields as follows:
Name
“To Video network”
Type
Neighbor
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2
Page 51 of 92