Cisco Cisco Fiber IGESM Switch Module for IBM 릴리즈 노트
20
Release Notes for the Cisco Systems Intelligent Gigabit Ethernet Switch Modules for the IBM BladeCenter
43W7806
Documentation Updates
The CONFIG_FILE environment variable can also be reset by using the no boot config-file
global configuration command.
global configuration command.
The HELPER_CONFIG_FILE environment variable can also be reset by using the no boot
helper-config-file global configuration command.
helper-config-file global configuration command.
These commands were added to the command reference:
•
•
platform chassis-management protected-mode
Use the platform chassis-management protected-mode global configuration command to enable
protected mode on the CIGESM blade switch. Use the no form of this command to return to the default
setting.
protected mode on the CIGESM blade switch. Use the no form of this command to return to the default
setting.
platform chassis-management protected-mode
no platform chassis-management protected-mode
Syntax Description
This command has no arguments or keywords.
Defaults
Protected mode is turned off.
Command Modes
Global configuration
Command History
Usage Guidelines
By default, the IBM management module controls the blade switch. When you enter this command,
control of the blade switch by the management module is disabled.
control of the blade switch by the management module is disabled.
Protected mode must be enabled on the chassis management module before you enter this command on
the blade switch. For information about enabling protected mode on the chassis management module,
see the management module documentation at this URL:
the blade switch. For information about enabling protected mode on the chassis management module,
see the management module documentation at this URL:
http://www-03.ibm.com/servers/eserver/support/bladecenter/index.html
You must reboot the blade switch after entering the command.
The switch blocks this command if, after rebooting, an IP-manageable interface on the switch module is
not reachable from an external interface. (This prevents the switch module from being unmanageable
after reboot.)
not reachable from an external interface. (This prevents the switch module from being unmanageable
after reboot.)
Release
Modification
12.1(22)EA9
This command was introduced.