Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point 설치 가이드

If you are mounting the access point in a hazardous location, refer to the 

, which contains additional requirements and procedures you 

must follow.

When you are unpacking the access point, do not remove the foam blocks attached to the antenna 
connectors. The foam protects the antenna connectors during installation.

Follow these steps to unpack the access point:

Open the shipping container and carefully remove the contents. 

Return all packing materials to the shipping container, and save it.

Ensure that all items listed in the 

 section are included in the shipment. If any item is 

damaged or missing, notify your authorized Cisco sales representative. 

Each access point package contains the following items:

Access point 

Cisco product documentation and translated safety warnings

Grounding lug with two screws and lock washers

Three liquid tight adapters 

Two-pin DC power connector

Ground lug (Panduit PLCD6-10A-L) and screws with lock washers

The hazardous location version of the access point is a specially modified orderable unit that 
ships with two PG-13 1/2 NPT conduit adapters and a grounding lug with screw and lock 
washers.

Ground lug crimping tool (Panduit CT-720 with CD-720-1 die) 

6-AWG copper ground wire

13 mm box-end wrench or socket set 

Adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench

Small flat screwdriver for DC power connector

Optional power injector (AIR-PWRINJ1500-2=)