Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point 설치 가이드

Cisco Aironet 1520 Series Outdoor Mesh Access Point Mounting Instructions

78-18269-04

Connecting a Fiber-Optic Cable to the Access Point

Step 2

Open the hinged cover (see the

“Opening the Access Point Hinged Cover” section on page 36

for

instructions).

Step 3

For cable strand deployments, remove the SCTE 5/8 plug (item 1 in

Figure 26

) using a 13 mm wrench

or socket. For all other deployments, remove the fiber-optic connector plug (item 5 in

Figure 26

) using

an adjustable wrench, the 22 mm socket, or the Sealcon S-22-WR wrench.

Step 4

Place the two large reels with the small reels on top as shown in

Figure 26

Step 5

Align the screw holes in the large and small reels, and insert four attachment screws in each of the reel
pairs. Tighten the screws to 3 to 4 in. lbs (0.34 to 0.45 Nm).

Step 6

Remove the plug from the end of the SFP module, and insert the module into the SFP receptacle (see

Figure 26

Figure 26

Fiber-Optic Cable Components

SCTE 5/8 plug

Four screws for each reel assembly

SFP module slot

Fiber-optic connector plug

Fiber reels (large reel with small reel on top)