Cisco Cisco 5520 Wireless Controller 문제 해결 가이드

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Refer to Cisco Technical Tips Conventions for more information on document conventions.

The MAG − PMIPv6 Feature is supported on WLC 5508, WSIM2 and WLC 8500 platforms.

• 

WLC to support connectivity with up to 10 LMAs.

• 

WLC to support the same number of PMIPv6 clients as supported by a base WLC type on WLC 5508
 7K sessions, WSIM2  15K sessions and WLC 8510  40K sessions.

• 

WLC to support Simple IP* or PMIPv6 WLAN (Simple IP is currently supported, such as IPv4
and/or IPv6 clients on a WLAN).

• 

PMIPv6 WLAN supports IPv4 Clients only in release 7.3.

• 

WLC to support IPv4 PMIPv6 GRE Tunnels only to LMA in release 7.3. One static tunnel per LMA
(Management IP to LMA IP)

• 

All WLC (PMIPv6  MAG) to LMA testing was done on an ASR5k  LMA simulator using these
parameters: