Cisco Cisco 4404 Wireless LAN Controller 기술 참조
8
Deployment Guide for Cisco Guest Access Using the Cisco Wireless LAN Controller, Release 4.1
OL-13691-01
Configuring Guest Access on the Cisco Wireless LAN Controller
Modifying the WLAN Instance to Define Security Policies
After configuring the IP address for the guest and secure VLAN interfaces for the wireless LAN, you
can define security polices such as web authentication (a Layer 3 security policy) for the guest and secure
(employee) wireless LAN access interfaces.
can define security polices such as web authentication (a Layer 3 security policy) for the guest and secure
(employee) wireless LAN access interfaces.
To define security policies for the WLANs, follow these steps:
Step 1
Click WLANs. The WLANs summary window appears (see
Figure 6
WLANs Summary Page Showing Existing Defined Wireless LANs
Step 2
Click the blue drop-down arrow next to guest WLAN and select Edit. The window seen in
displays.
Figure 7
WLANs > Edit Window for the Guest WLAN
Step 3
At the General Policies tab, check the DHCP Relay/DHCP Server IP Addr check box to verify
whether you have a valid DHCP server assigned to the WLAN.
whether you have a valid DHCP server assigned to the WLAN.
If you have a DHCP server assigned, continue with Step 4.
If you have no DHCP server assigned to the WLAN, follow Steps a through e below:
a.
Under General Policies, uncheck the Admin Status check box.