Cisco Cisco Aironet 1000 Series Lightweight Access Point 설치 가이드
7
EU Directive 1999/5/EC - Compliance Information for the AIR-AP1010-E-K9, AIR-AP1020-E-K9 and AIR-AP1030-E-K9 IEEE 802.11 a/b/g Access
78-17138-02
Operating Frequency
.
Operating Frequency
The operating frequency in a wireless LAN is determined by the access point. It is important that the
access point is correctly configured to meet the local regulations.
access point is correctly configured to meet the local regulations.
for the country specific operating frequency ranges.
Changing Output Power
The output power on the 1000 series access points can be only be changed using a Cisco 2600 or 4400
series wireless LAN controller, or the controllers on a Wireless Services Module (WiSM).
series wireless LAN controller, or the controllers on a Wireless Services Module (WiSM).
Table 3
2.4-GHz Dedicated (External) Antennas and Maximum Allowed Power Settings
Cisco Part Number
Antenna
Gain (dBi)
Gain (dBi)
Maximum Power
Setting
Setting
1,2
(#)
1.
Maximum power settings refer to the access point power settings on the controller interface. See Table 5 for all the possible
power settings and corresponding values.
power settings and corresponding values.
2.
The power setting inside the brackets is the power setting to be used for this antenna for use in France when operating
outdoors within the 2454 – 2483.5 MHz band.
outdoors within the 2454 – 2483.5 MHz band.
Antenna Description
AIR-ANT4941
AIR-ANT5959
AIR-ANT1728
AIR-ANT2506
AIR-ANT3213
AIR-ANT1729
AIR-ANT2012
AIR-ANT3549
2.2
2.0
5.2
5.2
5.2
6.0
6.5
9.0
1 (3)
1 (3)
1 (4)
1 (4)
1 (4)
1 (4)
1 (4)
2 (5)
Dipole
Diversity omnidirectional
Omnidirectional ceiling mount
Omnidirectional mast mount
Diversity omnidirectional
Patch wall mount
Diversity patch
Hemispherical patch
Table 4
5-GHz Dedicated (external) Antennas and Maximum Allowed Power Settings
Cisco Part Number
Gain
(dBi)
(dBi)
Frequency
Band (GHz)
Band (GHz)
Regulatory
Limit
(EIRP) mW
(dBm)
Limit
(EIRP) mW
(dBm)
Maximum
Power
Setting (#)
Power
Setting (#)
1
1.
Maximum power settings refer to the access point power settings on the controller interface. See Table 5 for all the possible
power settings and corresponding values.
power settings and corresponding values.
Antenna Description
AIR-ANT5135D-R
3.5
5150 – 5350
5470 – 5725
5470 – 5725
200 (23)
1000 (30)
1000 (30)
1
1
1
Dipole
AIR-ANT5160V-R
6
5150 – 5350
5470 – 5725
5470 – 5725
200 (23)
1000 (30)
1000 (30)
1
1
1
Omnidirectional