Cisco Cisco Aironet 1000 Series Lightweight Access Point 설치 가이드

In order to meet the different regulatory power limits as well as the Transmit Power Control (TPC) 
requirement, the equipment has different user-selectable power levels. Devices should always be 
configured to the lowest possible power level. See the 

 for 

instructions on how to change the output power settings.

For the Cisco AIR-AP1010-E-K9, AIR-AP1020-E-K9 and AIR-AP1030-E-K9, the following CE mark and 
class-2 identifier are affixed to the equipment and its packaging:

In the majority of the EU and other European Countries, the 2.4- and 5-GHz bands have been made 
available for the use of wireless LANs. 

 provides an overview of the regulatory requirements in 

general applicable for the 2.4- and 5-GHz bands.

Later in this section you will find an overview of countries in which additional restrictions or 
requirements or both are applicable.

The requirements for any country may evolve. Cisco recommends that you check with the local 
authorities for the latest status of their national regulations for both the 2.4- and 5-GHz wireless LANs.

In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage.

2400–2483.5

100 (20)

–

x

5150–5350

1

200 (23)

x

–

5470–5725

1

1000 (30)

–

x

1.

Dynamic Frequency Selection and Transmit Power Control is required in the 5250 to 5350-MHz and 5470 to 5725-MHz 
frequency range.

I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs.