Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

This section lists new features in Cisco IOS Release 12.2(8)JA.

Cisco IOS Release 12.2(8)JA can be loaded on 1200 series access points that are configured at the 
factory for IOS.

Cisco IOS Release 12.2(8)JA supports TACACS+. TACACS+ provides detailed accounting information 
and flexible administrative control over authentication and authorization processes. It provides secure, 
centralized validation of administrators attempting to gain access to your access point. 

This section contains information you should keep in mind when installing 1200 series access points.

This section provides information on installing 1200 series access points in environmental air space, 
such as above suspended ceilings.

Cisco Aironet 1200 Series Access Points provide adequate fire resistance and low smoke-producing 
characteristics suitable for operation in a building's environmental air space, such as above suspended 
ceilings, in accordance with Section 300-22(C) of the National Electrical Code (NEC) and Sections 2-128, 
12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.

The power injector is not intended for use in extremely high or low temperatures or in environmental 
air spaces, such as above suspended ceilings.

If you plan to mount a 1200 series access point with a 5-GHz radio in an area subject to environmental 
air space, Cisco recommends that you mount the access point horizontally so that its antennas point 
down. Doing so ensures that the access point complies with regulatory requirements for environmental 
air space with the 5-GHz radio installed. 

This section describes issues you should consider before applying power to an access point.

The nominal voltage for 1200 series access points is 48 VDC, and the access point is operational up 
to 60 VDC. Voltage higher than 60 VDC can damage the equipment.