Cisco Cisco Aironet 1810w Access Point 문제 해결 가이드
Notes:
- For LAN port 1, PoE is supported and can be enabled or disabled. For any device that
needs PoE (for example, I Phone), use LAN1 and enable PoE on the AP Group.
- See Cisco bug ID
- For LAN port 1, PoE is supported and can be enabled or disabled. For any device that
needs PoE (for example, I Phone), use LAN1 and enable PoE on the AP Group.
- See Cisco bug ID
- 1810W LAN Port allows unauthenticated device traffic in
local switching (Fixed in 8.2.130.0)
Verify
In order to verify if local switching works, enter the show mac address-table dynamic command
to check the MAC address table on the AP's switch and verify the connected client MAC address
is learned on the proper port and VLAN.
to check the MAC address table on the AP's switch and verify the connected client MAC address
is learned on the proper port and VLAN.
If LAN port client data traffic is centrally switched when local switching is enabled on the RLAN,
verify the FlexConnect VLAN support and VLAN mapping configurations are correct on the AP.
verify the FlexConnect VLAN support and VLAN mapping configurations are correct on the AP.
Troubleshoot
There is currently no specific troubleshooting information available for this configuration.