Cisco Cisco Aironet 1400 Wireless Bridge 설치 가이드

If the initial antenna positioning is reasonably accurate, both bridges initialize and quickly associate with 
one another. If the bridges do not associate, the antennas may be poorly aligned and you must adjust the 
antenna position during the bridge startup cycle. Persistent association problems can indicate poor 
placement of the bridge or obstacles in the transmission path.

Use LED indications to verify the state of the bridge during the association process. The following 
section explains how to interpret LED indicators.

When you power up the bridge for the first time, it starts in a special installation mode. The LEDs 
indicate the startup status, operating mode, association status, and received signal strength. This 
information simplifies the process of activating the link and positioning the antenna from the bridge 
mounting location. 

The LEDs are mounted on the back of the housing near the connectors (see 

Power injector LR interface

Status LED

RSSI voltage port

Radio LED

Ethernet LED

Install LED

88777