Cisco Cisco Aironet 350 Access Points 릴리즈 노트
5
Release Notes for Cisco Aironet 350, 1100, and 1200 Series Access Points for Cisco IOS Release 12.2(15)XR
OL-6047-01
Installation Notes
infrastructure device supporting Layer 3 mobility. Support for Layer 3 roaming is provided for all Wi-Fi
Certified client devices. Support for fast secure Layer 3 roaming is provided for Cisco or Cisco
Compatible wireless client devices using the Cisco Centralized Key Management (CCKM) protocol.
Certified client devices. Support for fast secure Layer 3 roaming is provided for Cisco or Cisco
Compatible wireless client devices using the Cisco Centralized Key Management (CCKM) protocol.
Installation Notes
This section contains information you should keep in mind when installing 350, 1100, and 1200 series
access points.
access points.
Installation in Environmental Air Space
This section provides information on installing 1100 and 1200 series access points in environmental air
space, such as above suspended ceilings.
space, such as above suspended ceilings.
Cisco Aironet 1100 and 1200 Series Access Points provide adequate fire resistance and low
smoke-producing characteristics suitable for operation in a building's environmental air space, such as
above suspended ceilings, in accordance with Section 300-22(C) of the National Electrical Code (NEC)
and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.
smoke-producing characteristics suitable for operation in a building's environmental air space, such as
above suspended ceilings, in accordance with Section 300-22(C) of the National Electrical Code (NEC)
and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.
Caution
The power injector does not provide fire resistance and low smoke-producing characteristics and is not
intended for use in extremely high or low temperatures or in environmental air spaces, such as above
suspended ceilings.
intended for use in extremely high or low temperatures or in environmental air spaces, such as above
suspended ceilings.
Note
If you plan to mount a 1200 series access point with a 5-GHz radio in an area subject to environmental
air space, Cisco recommends that you mount the access point horizontally so that its antennas point
down. Doing so ensures that the access point complies with regulatory requirements for environmental
air space with the 5-GHz radio installed.
air space, Cisco recommends that you mount the access point horizontally so that its antennas point
down. Doing so ensures that the access point complies with regulatory requirements for environmental
air space with the 5-GHz radio installed.
Power Considerations
This section describes issues you should consider before applying power to an access point.
Caution
The operational voltage range for 1100 series access points is 24 to 60 VDC, and the nominal voltage is
48 VDC. Voltage higher than 60 VDC can damage the equipment.
48 VDC. Voltage higher than 60 VDC can damage the equipment.
Caution
The nominal voltage for 1200 series access points is 48 VDC, and the access point is operational up to
60 VDC. Voltage higher than 60 VDC can damage the equipment.
60 VDC. Voltage higher than 60 VDC can damage the equipment.
Caution
Cisco Aironet power injectors are designed for use with Cisco Aironet access points and bridges only.
Do not use the power injector with any other Ethernet-ready device. Using the power injector with other
Ethernet-ready devices can damage the equipment.
Do not use the power injector with any other Ethernet-ready device. Using the power injector with other
Ethernet-ready devices can damage the equipment.