Cisco Cisco Aironet 350 Access Points 릴리즈 노트
6
Release Notes for Cisco Aironet 350, 1100, and 1200 Series Access Points for Cisco IOS Release 12.2(15)XR
OL-6047-01
Installation Notes
Note
The WS-F6K-PWR power over Ethernet (PoE) daughtercard in a Catalyst 6500 series switch cannot
supply power to a 1200 series access point. Using a Catalyst 6500 series switch for inline power requires
the WS-F6K-FE48-AF, WS-F6K-GE48-AF, or WS-F6K-VPWR-GE PoE daughtercard.
supply power to a 1200 series access point. Using a Catalyst 6500 series switch for inline power requires
the WS-F6K-FE48-AF, WS-F6K-GE48-AF, or WS-F6K-VPWR-GE PoE daughtercard.
Use Only One Power Option
You cannot provide redundant power to 1100 and 1200 series access points with both DC power to its
power port and inline power from a patch panel or powered switch to the access point’s Ethernet port. If
you apply power to the access point from both sources, the switch or power patch panel might shut down
the port to which the access point is connected.
power port and inline power from a patch panel or powered switch to the access point’s Ethernet port. If
you apply power to the access point from both sources, the switch or power patch panel might shut down
the port to which the access point is connected.
shows the power configuration that can shut
down the port on the patch panel or powered switch.
Figure 1
Improper Power Configuration Using Two Power Sources
Operating 5-GHz Radio Requires Power Injector, Power Module, or Catalyst 3550-24 PWR Switch
The 1200 series power injector and the 1200 series power module support operation of the 5-GHz radio
in the access point. Currently, the Catalyst 3550-24 PWR switch supports power for both the 2.4-GHz
radio and the 5-GHz radio. Other switches and power patch panels might not provide enough power for
the 5-GHz radio.
in the access point. Currently, the Catalyst 3550-24 PWR switch supports power for both the 2.4-GHz
radio and the 5-GHz radio. Other switches and power patch panels might not provide enough power for
the 5-GHz radio.
Access Point Requires 1200 Series Universal Power Supply and Power Injector
The 350 series universal power supply and power injector are not compatible with the 1200 series access
point. If you use a power injector or a power module to provide power to a 1200 series access point, you
must use a 1200 series universal power supply. If you need to use a power injector to inject power into
the access point’s Ethernet port, you must use a 1200 series power injector.
point. If you use a power injector or a power module to provide power to a 1200 series access point, you
must use a 1200 series universal power supply. If you need to use a power injector to inject power into
the access point’s Ethernet port, you must use a 1200 series power injector.
Universal
power supply
SYST
RPS
DUPLX
MODE
SPEED
UTIL
STAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
23
24
10Base-T / 10
0Base-TX
100Base-FX
Catalyst 2950
SERIES
Switch with
inline power or
power patch panel
Access point
74329