Cisco Cisco Aironet 1524 Lightweight Outdoor Mesh Access Point 설치 가이드
11
OL-19762-01
Cisco Aironet 1524SB Outdoor Mesh Access Point Hardware Addendum
Interpreting the LEDs
The access point LEDs are identified in
Figure 4
Access Point LEDs
The access point LED signals are listed in
1
Status LED—access point and software status 3
RF-1 LED—status of the radio in slot 0
(2.4-GHz) and slot 2 (5.8-GHz)
(2.4-GHz) and slot 2 (5.8-GHz)
2
Uplink LED—Ethernet, cable, or fiber access 4
RF-2 LED—status of the radio in slot 1
(5.8-GHz). The slot 3 (5.8-GHz) radio is
disabled for this project phase.
(5.8-GHz). The slot 3 (5.8-GHz) radio is
disabled for this project phase.
Table 3
Access Point LED Signals
LED
Color
1, 2
Meaning
Status
Off
–
Green
Access point is operational.
Blinking green
Download or upgrade of Cisco IOS image file in progress.
Amber
Mesh neighbor access point discovery in progress.
Blinking amber
Mesh authentication in progress.
Blinking red/green/amber
LWAPP discovery in progress.
Red
Firmware failure. Contact your support organization for assistance.
Uplink
Off
No physical connector present or the uplink port is not operational.
Green
Uplink network is operational (cable, fiber optic, or Ethernet).